Fintrix Consulting LLC

Cash flow

Can you afford your next hire? A cash-based way to decide

November 18, 2026 · 10 min read

← All articles
Manager interviewing a job candidate across a desk with a laptop and folders by a window
Photo via Pexels

Quick answer

You can afford a hire when your cash can carry their fully loaded cost (wages plus employer payroll taxes, benefits, equipment and recruiting) through the months before they pay for themselves, and still stay above a minimum cash floor if things go slower than planned. Work out the monthly cost, map out the ramp month by month, and run the cash forecast twice: once with your expected ramp and once with a slower one.

You're turning work away, or close to it. Your best people are stretched, a client just hinted at a bigger project, and there's a healthy-looking number in the bank account. So you start writing the job ad. Then, somewhere around 2 a.m., the doubt kicks in: what if the work dries up three months after they start?

That doubt is reasonable, and the bank balance alone can't settle it. It says nothing about what the hire really costs or how long they'll take to pay their way.

This post gives you a simple cash-based test: the fully loaded cost of an employee using 2026 payroll tax rates, a month-by-month ramp, and a runway check, with one worked example all the way through.

23%

What taxes, benefits and tools add on top of salary in this post's example

7.65%

Employer share of Social Security and Medicare on each paycheck

Months

How long most hires take to pay for themselves. Your cash has to carry that gap

Why isn't "we have cash in the bank" enough?

Because a hire is a recurring commitment, and a bank balance is a snapshot. Three problems hide behind a good balance:

  1. It may not be yours. Customer deposits for future work, sales tax you've collected, payroll taxes waiting to be deposited, a credit card bill due next week. Our post on cash flow vs profit walks through why the bank and the P&L disagree.
  2. It ignores the ramp. A new person costs money from day one but rarely produces at full speed for months.
  3. It ignores the bad case. The question isn't "can we afford this if everything goes to plan?" It's "can we afford this if the ramp is slow and a big client pays late?"

So the test has three parts: the real monthly cost, the ramp, and the cash.

What does an employee really cost?

Salary is the biggest piece, but not the whole thing. Here's what goes on top, with 2026 federal rates:

  • Social Security: 6.2% of wages, employer share, on wages up to the 2026 wage base of $184,500. Above that, it stops for the year.
  • Medicare: 1.45% of all wages, employer share. There's no cap. (The extra 0.9% Additional Medicare Tax on high earners is withheld from the employee, not paid by you.)
  • [FUTA](/glossary#futa): 6.0% on the first $7,000 of each employee's wages, but most employers get a credit of up to 5.4% for paying state unemployment tax on time, so the usual net is 0.6%, or $42 per employee per year.
  • [SUTA](/glossary#suta): state unemployment tax. Your state sets the wage base and assigns your rate, and new employers usually get a standard starting rate.
  • Benefits: health insurance contribution, retirement match, paid leave.
  • Workers' compensation insurance, required in most states once you have employees.
  • Equipment and software: laptop, phone, licenses for every tool they'll use.
  • One-time costs: job ads, recruiter fees, background checks, onboarding time.

Our free payroll cost calculator does the tax part for you with the 2026 figures.

A worked example: one more project engineer

Say you run a nine-person engineering consulting firm. You want to hire a project engineer at $72,000 a year. Here's the fully loaded annual cost:

CostHow it's worked outPer year
Salary$72,000
Social Security (employer)6.2% × $72,000$4,464
Medicare (employer)1.45% × $72,000$1,044
FUTA0.6% × $7,000$42
State unemploymentSay 2.7% × a $10,000 state wage base$270
Health insuranceSay $600 a month employer share$7,200
401(k) matchSay 3% of salary$2,160
Workers' comp and softwareSay $420 + $100 a month$1,620
Fully loaded$88,800

From salary to fully loaded cost

Hypothetical project engineer, $72,000 salary, 2026 federal rates

  • Adds cost
  • Reduces cost
  • Total
$0$25k$50k$75k$100kSalary: $72,000$72kSalarySocial Security: +$4,464+$4.5kSocialSecurityMedicare: +$1,044+$1kMedicareFUTA: +$42+$42FUTAState unemployment: +$270+$270StateunemploymentHealth insurance: +$7,200+$7.2kHealthinsurance401(k) match: +$2,160+$2.2k401(k)matchWorkers' comp and software: +$1,620+$1.6kWorkers'comp andsoftwareFully loaded cost: $88,800$89kFullyloaded cost

Hypothetical example. 72,000 + 4,464 + 1,044 + 42 + 270 + 7,200 + 2,160 + 1,620 = 88,800. State unemployment, insurance and benefits vary widely.

Show the numbers
Salary$72,000
Social Security+$4,464
Medicare+$1,044
FUTA+$42
State unemployment+$270
Health insurance+$7,200
401(k) match+$2,160
Workers' comp and software+$1,620
Fully loaded cost$88,800

That's $7,400 a month, about 23% more than salary alone. On top of that come one-time costs of about $6,000: $3,000 for recruiting and a background check, $2,500 for a laptop and equipment, and $500 of onboarding and setup.

Notice what's driving the gap. Payroll taxes are only about $5,800 of the $16,800 difference. Benefits are bigger. If you offer generous health coverage, your multiple may be closer to 1.3 or more.

How long until the hire pays for themselves?

This is the step most owners skip. A new engineer doesn't bill 30 hours in week one. Then there's the payment lag: work billed in month three gets paid in month four on net 30 terms.

Say the firm expects the new engineer's work to bring in this much extra cash (after the 30-day collection lag), compared with the $7,400 monthly cost:

MonthExtra cash collectedCost of the hireNet cash effectRunning total
1$0$13,400 (includes $6,000 one-time)−$13,400−$13,400
2$0$7,400−$7,400−$20,800
3$3,000$7,400−$4,400−$25,200
4$6,000$7,400−$1,400−$26,600
5$9,000$7,400+$1,600−$25,000
6 onward$12,000$7,400+$4,600−$20,400 at month 6

Two numbers matter here. The deepest point is −$26,600 in month four: that's how much cash the hire uses before they start giving it back. And the payback month is month 11, when the running total turns positive (+$2,600). Until then, you're funding the hire out of the cash you already have.

"Extra cash collected" should be gross profit, not revenue, if the hire's work also brings direct costs like subcontractors or materials. For a consulting firm where the engineer's own time is the product, collections are close enough.

Not every hire brings in revenue directly. An office manager or a bookkeeper pays off by freeing up billable time or by stopping costly mistakes. That's harder to measure, so be honest about it: if you can't name what the hire will free up or bring in, the cash test has to stand on cost alone.

The cash runway test

Now put the hire into your cash forecast. Say the firm has $120,000 in the bank today and, without the hire, adds about $2,000 a month. Its operating outflows run about $80,000 a month, so it sets a cash floor of $80,000: roughly one month of costs it never wants to dip below.

Run it twice. The base case uses the ramp above. The slow case assumes everything slips by two months (the engineer takes longer to ramp, or a client pays late), so the extra cash starts in month five instead of month three.

Bank balance over 12 months with the new hire

Hypothetical nine-person engineering firm, starting with $120,000

  • Base case ramp
  • Ramp two months slower
$0$50k$100k$150k$200kCash floorM1 · Base case ramp: $108,600M2 · Base case ramp: $103,200M3 · Base case ramp: $100,800M4 · Base case ramp: $101,400M5 · Base case ramp: $105,000M6 · Base case ramp: $111,600M7 · Base case ramp: $118,200M8 · Base case ramp: $124,800M9 · Base case ramp: $131,400M10 · Base case ramp: $138,000M11 · Base case ramp: $144,600M12 · Base case ramp: $151,200M1 · Ramp two months slower: $108,600M2 · Ramp two months slower: $103,200M3 · Ramp two months slower: $97,800M4 · Ramp two months slower: $92,400M5 · Ramp two months slower: $90,000M6 · Ramp two months slower: $90,600M7 · Ramp two months slower: $94,200M8 · Ramp two months slower: $100,800M9 · Ramp two months slower: $107,400M10 · Ramp two months slower: $114,000M11 · Ramp two months slower: $120,600M12 · Ramp two months slower: $127,200M1M2M3M4M5M6M7M8M9M10M11M12

Hypothetical example. Starting cash $120,000, plus $2,000 a month from the existing business, plus the hire's running total from the ramp table.

Show the numbers
 Base case rampRamp two months slower
M1$108,600$108,600
M2$103,200$103,200
M3$100,800$97,800
M4$101,400$92,400
M5$105,000$90,000
M6$111,600$90,600
M7$118,200$94,200
M8$124,800$100,800
M9$131,400$107,400
M10$138,000$114,000
M11$144,600$120,600
M12$151,200$127,200

In the base case, cash bottoms out around $100,800 in month three and recovers from there. In the slow case it gets down to $90,000 in month five, still above the floor, with about $10,000 to spare.

So this hire passes, but not by a lot. If a slow quarter took the firm's own $2,000 a month surplus to zero at the same time, the slow case would bottom out at $78,600 in month six and break the floor. That's the kind of thing you want to know before you sign an offer letter, not after.

If the hire fails the test, you have options that don't mean "never":

  • Wait for a trigger. Hire when a specific contract is signed or when receivables over 30 days drop below a set amount.
  • Start part-time or with a contractor, then convert. (Make sure the person is classified correctly; see employee or contractor.)
  • Collect a deposit or retainer on the project that's creating the need.
  • Line up a credit line before you need it, as a backstop rather than a plan.

For a business that's burning cash rather than adding it, use our startup runway calculator to see how many months the hire takes off your runway. For everyone else, a cash flow forecast with the hire added as its own line works well.

Common mistakes

Pricing the hire at salary. In our example that understates the cost by $16,800 a year, and that's before the one-time costs.

Assuming the hire is productive from day one. Most of the cash risk sits in the ramp. Map it month by month, even if the numbers are rough.

Counting revenue instead of cash. Billing isn't collecting. If your clients pay in 45 days, your ramp is 45 days slower than it looks.

Testing only the good case. One run of the forecast is a hope. Two runs (expected and slow) is a decision.

When should you get help?

If your books are reconciled monthly and you keep a rolling forecast, you can run this test yourself with the tools above in an hour or two. Plenty of owners do.

It's worth bringing someone in when:

  • you're adding several people in the same year, or a senior hire with a big salary
  • your bank balance and your books don't agree, so you're not sure what cash is really free
  • revenue is lumpy or seasonal, and the slow case is hard to model
  • you're planning to borrow to fund growth

A fractional CFO can build the forecast, set your cash floor and run the scenarios with you. If you'd like to talk it through, Fintrix Consulting offers a free 30-minute call.

Frequently asked questions

How much does an employee cost on top of salary?

Employer payroll taxes alone are 7.65% for Social Security and Medicare (Social Security stops at the 2026 wage base of $184,500), plus federal and state unemployment tax. With benefits, insurance, equipment and software, our example came to about 23% above salary; rich health benefits push it higher. Our payroll cost calculator works out the tax part.

How long should a new hire take to pay for themselves?

It depends on the role. A billable hire at a service business might pay back in under a year once you include the collection lag. A senior or non-billable hire can take much longer. The point isn't to hit a standard number but to know your deepest cash point and make sure you can carry it.

How much cash should I have before hiring?

Enough to absorb the hire's deepest cash point in a slow case and still stay above your own minimum cash floor. A common floor is one to two months of operating costs, but it depends on how predictable your revenue is.

Is hiring a contractor cheaper than an employee?

Sometimes, on paper, because you don't pay payroll taxes or benefits. But contractors often charge higher rates, and the choice isn't just about cost: if you control how and when the work is done, the person may legally be an employee. See our post on employee vs contractor.

Should I use profit or cash to decide whether to hire?

Both, but cash decides. Profit tells you whether the business can sustain the cost over time. Cash tells you whether you can survive the months before the hire pays off.

The bottom line

A hire is affordable when your cash can carry the full cost through the ramp, in a slow case, without dipping below a floor you've set in advance. Work out the fully loaded monthly cost, map the ramp month by month, and run your forecast twice. If it passes, hire with confidence. If it doesn't, pick a trigger to wait for instead of guessing.

This article is general information, not advice for your situation. Rules change and details matter, so talk to us or your CPA before acting on it.

Have a question about this article?

Ask us. A real person will reply by email within one business day. Your question isn’t published.

Protected by reCAPTCHA. Google’s Privacy Policy and Terms apply.

Ready for books you can trust?

Book a free 30-minute consultation. We'll review where your finances stand today and show you exactly how we'd help.