Fintrix Consulting LLC

Bookkeeping

Inventory counts and shrinkage at year-end

November 19, 2026 · 10 min read

← All articles
Silhouette of a worker writing on a clipboard between rows of metal stockroom shelves
Photo via Pexels

Quick answer

Count everything on hand at year-end, value the count at cost, and compare it with what your books say you should have. Fix cutoff errors first (goods received but not recorded, goods sold but still on the shelf), then the difference that's left is shrinkage: theft, damage and errors. Book it by crediting inventory and debiting a cost of goods sold account, and track your shrink rate (shrinkage divided by net sales) year over year.

Your accounting system says you have $412,000 of inventory. Your shelves say something else, and you won't know what until somebody walks the aisles with a clipboard on December 31.

That count is the one time all year the balance sheet gets checked against the real world. Get it right and your cost of goods sold, gross margin and taxable income are right. Rush it or skip the cutoff, and the numbers you hand your CPA are a guess.

Here's how to plan the count, reconcile it to the books, book the shrinkage and read your shrink rate. (Valuing slow or damaged stock is a separate step, covered in our post on inventory reserves and write-downs.)

Do you really need a physical count?

If you carry inventory, yes. The IRS says it plainly in Publication 538: even with a perpetual (book) inventory system, you must take a physical inventory at reasonable intervals, and the book amount must be adjusted to agree with the actual inventory.

A perpetual system is only as good as what gets scanned. Unscanned returns, mis-keyed receipts and broken items pile up quietly until the count.

Bigger operations often use cycle counts (a slice of the stock every week) instead. Most small businesses still do one full count at year-end, which is what this post assumes.

How should you plan the count?

Plan it like a small project, starting two or three weeks out.

A year-end count plan
  1. 3 weeks before

    Set the date and the rules

    Pick the count date (ideally the last day of the year or the closest day the doors are shut). Decide who counts, who checks and who supervises.

  2. 2 weeks before

    Map and tidy

    Number every shelf, bin and pallet location. Clear out damaged goods and customer returns into their own marked areas so they're counted separately.

  3. Day before

    Freeze and cutoff

    Stop receiving and shipping, or tag anything that moves. Write down the last receiving report and last shipping document numbers.

  4. Count day

    Count in pairs

    One person counts, one records. Use blind count sheets and tag each location once it's done.

  5. 1–3 days after

    Recount and reconcile

    Recount big differences, value the count at cost and compare it with the books.

  6. By the close

    Book the adjustments

    Fix cutoff entries, then book shrinkage before the year-end statements go out.

A few details make a big difference.

Use blind counts. A blind count sheet lists the item and location but not the quantity the system expects. When counters can see "48 on hand," they tend to find 48. When they can't, they count.

Separate duties. The people who receive and issue stock shouldn't be the only ones counting it. If they must count (in a small shop they usually do), pair them with someone who doesn't handle stock day to day.

Count in units, value later. Counters record quantities and units of measure (each, case of 12, pallet). Pricing at cost happens afterward, in the office, from the item records. Mixing the two on the floor creates errors.

Decide your recount threshold in advance. For example, recount any item where the difference is more than $500 or 10% of the expected quantity. Writing that down before the count stops the "just book it" shortcut at 9 p.m.

Why does cutoff matter so much?

Because the count is a snapshot of one moment, and the books have to describe the same moment. The usual cutoff problems:

  • Goods received but not recorded. The truck came on December 30, the boxes are on the shelf and got counted, but the vendor bill won't be entered until January. The count includes the stock; the books don't.
  • Goods sold but still on the premises. A customer paid on December 31 and picks up on January 3. The sale is recorded and inventory relieved, but the items got counted.
  • Goods in transit. Per Publication 538, purchased merchandise belongs in your inventory once title has passed to you, even if it's still on a truck. Goods you've sold come out once title passes to the buyer. Check the shipping terms on any purchase or sale near year-end.
  • Consignment. Goods you've sent out on consignment are still yours and belong in inventory. Goods others have consigned to you don't.

If you skip the cutoff review, cutoff errors get booked as shrinkage (or as phantom gains), and your cost of goods sold is wrong in both years.

A worked example: a gift and home goods retailer

Say you run a gift and home goods shop with net sales of $2,150,000 this year. You track inventory at cost in your accounting system. At December 31, the system shows $412,000 of inventory.

The count sheets, priced at cost, come to $409,500. Before comparing, you check cutoff and find two problems:

  1. A shipment received December 30 was counted, but the vendor bill for $8,600 hasn't been entered. The books are short $8,600.
  2. $3,200 of furniture sold and invoiced on December 31 was still in the back room and got counted. The books already relieved that inventory, so it comes out of the count. Corrected count: $406,300.

That makes the adjusted book balance $420,600 ($412,000 plus the $8,600 receipt), against a count of $406,300. The $14,300 gap is your shrinkage. During the count, the team set aside $2,400 of broken or water-damaged stock (counted at zero), which explains part of it. The other $11,900 is unexplained.

From book inventory to the physical count

Gift and home goods retailer, December 31

  • Adds inventory
  • Reduces inventory
  • Total
$0$200k$400k$600kBook inventory: $412,000$412kBookinventoryUnrecorded receipt: +$8,600+$8.6kUnrecordedreceiptAdjusted book: $420,600$421kAdjustedbookDamaged stock: −$2,400−$2.4kDamagedstockUnexplained shrink: −$11,900−$12kUnexplainedshrinkPhysical count: $406,300$406kPhysicalcount

Hypothetical example. The physical count is after removing $3,200 of goods already sold.

Show the numbers
Book inventory$412,000
Unrecorded receipt+$8,600
Adjusted book$420,600
Damaged stock−$2,400
Unexplained shrink−$11,900
Physical count$406,300

Where did the unexplained $11,900 come from? Breaking it down by department tells you where to look:

Unexplained shrinkage by department

Total $11,900

JewelryJewelry: $5,200$5.2kCandles and fragranceCandles and fragrance: $2,900$2.9kKitchenKitchen: $2,300$2.3kStationeryStationery: $1,500$1.5k

Hypothetical example.

Show the numbers
Jewelry$5,200
Candles and fragrance$2,900
Kitchen$2,300
Stationery$1,500

Jewelry is small, valuable and near the door. That's a security question, but the accounting surfaced it.

How do you book shrinkage?

Two entries, in this order. First the cutoff fix, then the shrinkage.

EntryAccountDebitCredit
1. Record the December 30 receiptInventory$8,600
Accounts payable$8,600
2. Adjust inventory to the countCOGS: inventory shrinkage$11,900
COGS: damaged and obsolete stock$2,400
Inventory$14,300

After both entries, inventory on the balance sheet is $406,300, matching the count. No entry is needed for the $3,200 of furniture, because the sale was already recorded correctly; it only had to come out of the count.

A few practical points:

  • Use separate accounts inside cost of goods sold for shrinkage and for damaged stock. Lumped into purchases, they disappear, and you lose the trend.
  • Adjust the item records too, not just the general ledger. If you post the dollar adjustment with a journal entry but leave the item quantities wrong, the next report will be off again. In QuickBooks Online or Xero, an inventory quantity adjustment updates both.

If you want to check how the adjustment moves your margin, our COGS calculator works from beginning inventory, purchases and ending inventory.

What's a normal shrink rate?

Shrink rate = shrinkage ÷ net sales. In the example, $14,300 ÷ $2,150,000 = 0.67% in total, or 0.55% if you count only the unexplained part.

Two cautions before you compare yourself with anyone. Industry surveys usually measure shrink at retail prices, while this example measures it at cost, so the percentages aren't comparable without converting. And your own history is the most useful benchmark: a shrink rate that jumps from 0.4% to 0.9% tells you more than any industry average.

$14,300

Total shrinkage at cost in the example

0.67%

Shrink rate: $14,300 ÷ $2,150,000 net sales

$5,200

Largest single department: jewelry

What about taxes?

Counts are required. As above, Publication 538 says to take a physical inventory at reasonable intervals and adjust the books to it.

Shrinkage estimates are allowed in some cases. If you count at a date other than year-end (say, October), section 471(b) of the tax code says using estimated shrinkage for the period after the count isn't a problem in itself, as long as you normally count at each location on a regular and consistent basis and you adjust your inventory and your estimating method when the estimates prove too high or too low.

Theft isn't deducted twice. Publication 538 notes that if inventory theft or casualty losses flow through cost of goods sold, you can't also claim them separately as a casualty or theft loss. Any insurance payment you receive is income.

Smaller businesses have options. A business meeting the gross receipts test (average annual gross receipts of $32 million or less for tax years beginning in 2026) can use the simplified inventory methods under section 471(c). How your count and shrinkage feed into those methods is a question for your CPA.

Common mistakes

Booking cutoff errors as shrinkage. In the example, skipping the cutoff check would have compared $412,000 with $409,500 and shown shrink of just $2,500, hiding $11,800 of the real $14,300.

Counting at retail and booking at cost (or the reverse). Pick one basis for the comparison. Most small businesses compare at cost.

Letting the stock keeper count alone. It's not about distrust. A second person catches errors, and it's a basic fraud control. See our post on small business fraud controls.

Plugging the difference without a recount. A single mis-keyed unit of measure (cases recorded as each) can look like thousands of dollars of shrink.

Fixing the ledger but not the item records. The next month's reports drift right back.

When should you get help?

A single-location shop with a few hundred items can run this itself with a good plan and two honest counters. Get help when you have several locations, inventory in transit or at third-party warehouses, landed costs to allocate (see landed cost and COGS), a lender's borrowing base that depends on inventory, or a shrink number that keeps growing and nobody can explain.

For product businesses, Fintrix Consulting reconciles inventory to your counts and ties it to the general ledger as part of the monthly close; see how we work with manufacturing and distribution businesses.

Frequently asked questions

Do I have to count inventory on December 31 exactly?

No, but the closer the better. If you count a few days before or after, you'll need to roll the count forward or back for receipts and sales in between. If you count well before year-end, talk to your CPA about how shrinkage for the remaining period is estimated.

What's the difference between shrinkage and an inventory write-down?

Shrinkage is stock that's missing or destroyed: the count is lower than the books. A write-down is stock you still have but that's worth less than it cost, like slow-moving or obsolete items. Both reduce inventory, but they're measured differently.

Where does shrinkage go on the income statement?

Usually in cost of goods sold, in its own account so you can track it. That lowers your gross margin, which is where owners and lenders expect to see it.

What's a blind count?

A count where the counter's sheet lists items and locations but not the quantity the system expects. It stops people from confirming the book number instead of counting.

How often should a small business count inventory?

At least once a year, at year-end. If shrink is high or inventory is valuable, add cycle counts of your high-value items monthly or quarterly.

The bottom line

Your year-end count is the one time your inventory balance meets reality. Plan it, freeze movement, use blind counts and fix cutoff before you look at the difference. What's left is shrinkage: book it to its own cost of goods sold account, update the item records, and watch the shrink rate from one year to the next. Then hand the count, the reconciliation and the entries to your CPA with the rest of the year-end file.

This article is general information, not advice for your situation. Rules change and details matter, so talk to us or your CPA before acting on it.

Have a question about this article?

Ask us. A real person will reply by email within one business day. Your question isn’t published.

Protected by reCAPTCHA. Google’s Privacy Policy and Terms apply.

Ready for books you can trust?

Book a free 30-minute consultation. We'll review where your finances stand today and show you exactly how we'd help.